Agilent 6890 GC with FID/ECD or NPD, Agilent G1512A Controller and Agilent 6890 Auto Injector

The Agilent 6890N is a state-of-the-art gas chromatograph that provides superior performance for all applications. Key to its performance is the use of advancedelectronic pneumatic control (EPC) modules and high performance temperature control. Each EPC unit is optimized for its intended use with a specific inlet and detector option.

This system can be used for the determination of Cannabinol – Pharmacologically, the principal psychoactive constituent of cannabis is tetrahydrocannabinol (THC), which is the most widely used illegal psychoactive drug in the United States. THC is only one of 400 compounds in the plant, including other cannabinoids, such as cannabidiol (CBD) and cannabinol (CBN). Consumption of cannabis has both psychoactive and physiological effects. The minimum amount of THC required to have a perceptible psychoactive effect is about 10 micrograms per kilogram of body weight. Although THC is typically considered the primary active component of the cannabis plant, various scientific studies suggest that certain other cannabinoids, like CBD, may also play a significant role in its psychoactive effects. For this reason, its precise recognition and quantification is fundamental.

Chromatographic Performance

• Retention time repeatability: <0.008% or <0.0008 min
• Area repeatability: <1%RSD

FID

• Minimum detectable level (for tridecane):<1.8 pg C/s
• Linear dynamic range: >107 (+10%). Digital data makes entire range available without range changes
• Data rates up to 200 Hz accommodate peaks as narrow as 25 ms at half height
• standard EPC for three gases:
  • Air: 0 to 800 mL/min
  • H2: 0 to 100mL/min
  • Make up gas (N2or He): ) to 100 mL/min
•  Available in two versions: capillary column optimized or adaptable for either packed or capillary columns.
• Flame out detection and automatic reigniting
• Grounded jet 450°C maximum operating temperature

Micro-ECD

• Minimum detectable level: <6 fg/mL lindane
• Proprietary signal linearization Linear dynamic range: >5 x 10-4 with lindane
• Data acquisition rate: up to 50 Hz
  uses Beta emission of <15 mCi 63Ni as the electron source
• Unique micro-cell design minimizes contamination and optimizes sensitivity
• 400°C maximum operating temperature
• Standard EPC makeup gas types: argon/5% methane or nitrogen; 0 to 150 mL/min
• Dynamic range: >5 x 10-5 with lindane

NPD

• MDL: <0..4 pg N/s, <0.2 pg P/s with azobenzene/Malathion octadecane mixture
• Dynamic range: >105 N, 105 P with azobenzene/Malathion octadecane mixture
• Selectivity: 25,000 to 1 gN/gC, 75,000 to 1 gP/gC with azobenzene/Malathion octadecane mixture
• Data acquisition rate: up to 200 Hz
• Standard EPC for three gases:
  • Air: 0 to 200 mL/min
  • H2: 0 to 30mL/min
  • Makeup gas: 0 to 100mL/min
• Available for packed/capillary columns or optimized for capillary columns
• 400°C maximum operating temperature

This refurbished Agilent 6890 (G1530A) Plus GC with FID/ECD or NPD, Agilent G1512A controller and Agilent 6890 auto injector is in great condition. It has been tested at SpectraLab Scientific.

A 90 day warranty is included. Multiple available.

Installation and extended warranty available upon request.