Agilent 7890B GC with Agilent 7010 QQQ GC/MS and 7693A Autosampler

This Set includes:

• (1) Agilent 7890B GC
• (1) Agilent 7010 (G7012A) Triple Quadrupole Mass Spectrometer
• (1) Agilent G4513A Autoinjector
• (1) Agilent G4514A 7693A Autosampler with 150 position Tray
• (1) Edwards Rotary Vane Pump RV5
• (1) PC with data

Agilent 7890B GC

• Retention Time Locking (RTL) maintains exact retention times from injection to injection, column to column, instrument to instrument, and lab to lab
• Capillary Flow Technology (CFT) provides unique instrument capabilities, such as multi-dimension gas chromatography (GC-GC/Deans Switch), comprehensive two-dimension gas chromatography (GCxGC) with flow modulation, and backflush at the beginning, middle, or end of the analytical column
• Single filament TCD that does not require a separate reference gas, does not require manual potentiometer adjustment, and provides a stable baseline with a minimal amount of signal drift
• Auto-ranging FID provides the ability to detect and quantitate from parts per billion (ppb) to parts per thousand in a single injection
• Integrated SCD/NCD (sulfur or nitrogen chemiluminescence detector) provides low ppb detection, equi-molar response, and quantitation for sulfur or nitrogen contaminants without quenching from matrix
• Carrier Gas Options: Helium Conservation Module, Hydrogen Sensors and Alternate Carrier Gas Solutions dramatically reduce the amount of helium used to offer flexibility in your laboratory
• Large Valve Oven (LVO) allows for the combination of multiple methods and simplified maintenance
• Multimode inlet (MMI) serves as a programmable temperature vaporizing injector with flexible capabilities
• Agilent Inert Flow Path provides increased sensitivity for active compounds, from injection to detection
• Low Thermal Mass (LTM) modules, up to 4 installed and operating, increase sample throughput with rapid column heating and cooling

Agilent 7010 (G7012A) QQQ

• New High-Efficiency EI Ion Source
  • This all-new EI source delivers astonishingly low detection limits. Demonstrated installation specification, with 2 fg OFN injected: IDL ≤ 0.5fg.
• Heated Gold Quadrupoles, Triple-Axis HED-EM Detector and Fast Venting
  • Enhance mass spec performance by reducing common contaminants, neutral noise and cool down time.
• Integrated GC/MS system features and Early Maintenance Feedback (EMF)
  • Align and monitor GC/MS operation to maximize uptime and aid with planned maintenance.

Agilent G413A Autoinjector

• Dual simultaneous injection saves time by doubling sample throughput
• Fast injection technology minimizes needle discrimination and sample degradation
• Perform single-stroke injection of up to 50 µL using a 100 µL syringe; multiple injections are possible depending on your needs
• Eliminate analyst-to-analyst variability and reduce rework using powerful sample preparation capabilities, including dilution, internal standard addition, heating, mixing, and solvent addition
• Modular design allows the flexibility to easily move the sampler from GC to GC or start with a single injector and add on to the system as needed

Edwards Rotary Vane Pump RV5