HP 6850 GC with FID and SSL Inlet

General Information:

Split/Splitless Capillary Inlet
– Maximum temperature: 375 °C
– Pressure range: 0–100 psi (0–150 psi optional) 
– Accepts columns from 50-µm id to 530-µm id
– Pressure pulse mode / Gas saver mode 
– Total flow ranges through the inlet: He, 20 to 1,000; H2, 26 to 1,000; N2, 20to 200 mL/min 
– Split ratio may be adjusted electronically without affecting column flow orhead pressure

Flame Ionization Detector (FID)
– Maximum temperature: 375 °C 
– Automatic ignition
– Flame-out detection and reignition 
– Minimum detectable: <5 pg carbon/s as propane using N2 carrier and a0.29-mm id jet 
– Linear dynamic range: 107 (±10%) • Full range auto scaling 
– Data acquisition rate: up to 200 Hz 
– Flows: air, 0 to 800; hydrogen, 0 to 100; make-up (He or N2), 0 to 100 mL/min

Column Oven
– Dimensions: 202 × 200 × 105 mm (HWD) 
– Oven power is turned off automatically when the lid is opened 
– Column basket diameter:130 mm 
– Standard: 5°C above ambient to 350°C.
– Temperature setpoint resolution: 1°C 
– Column bleed compensation 
– Maximum run time: 999.99 min

This refurbished HP 6850 GC with FID and SSL is in great condition. It has been tested at SpectraLab Scientific.