Waters Acquity UPLC System with 2996 PDA Detector, Sample Manager and Binary Solvent Manager
3-12 month warranty
Service options & contracts available
To sell, trade-in, or service your equipment
How do we Refurbish Lab Equipment?
Looking for further assistance? Contact Us
Request Quote/ Offer
Estimate Shipping Time
Canada & U.S.: 3-5 business days
International: 5-10 business days
Tariff-Free Shipping to the U.S.!
| Wavelength range | 190 to 800 nm |
| Light source | Prealigned, Deuterium lamp |
| Spectral Resolution/Optical Bandpass | 1.2 nm per photodiode with a total of 512 photodiodes, digital and optical (3D-mode) |
| Digital Resolution | 1.2 nm – 600 nm (2D mode) |
| Wavelength accuracy | ±1 nm |
| Linearity range | 5% at 2.0 AU, propylparaben, at 256 nm |
| Spectral resolution | 1.2 nm |
| Baseline noise | ±1.5 × 10–5 AU peak-to-peak, dry, at 254 nm |
| Drift | 1 × 10–3 AU/hour at 254 nm (after warm-up) ∆T ≤ 1°C per hour |
| Operation temperature | 4 to 40 °C (39 to 104 °F), not to vary more than 1 °C per hour (to prevent drift) |
| Relative humidity | 20 to 80%, noncondensing |
| Power | Grounded ac, 100 to 240 Vac |
| Power requirements | 100-230 VAC |
| Frequency range | 50 to 60 Hz |
| Path Length | 10 mm (standard analytical cell) |
| Cell volume | 8 µl (standard analytical cell) |
| Pressure Limit | 1000 psi (standard analytical cell) |
| Wetted materials | 316 stainless steel, fused silica Tefzel |
| Dimensions | Width: 11.5 in. (29 cm) Depth: 24 in. (61 cm) Height: 8.5 in. (22 cm) |
| Weight | 31.5 lbs (14.3 kg) |
| Injection volume range |
|
| Accuracy | +0.2 µL, measured by fluid weight removed from vial with 10.0 µL injections averaged over 20 injections using standard 100-µL syringe |
| Injection Linearity | >0.999 (See ACQUITY UPLC I-Class system specification document for conditions) |
| Maximum sample capacity | Any two of the following:
|
| Sample compartment temperature range |
|
| Temperature accuracy | +0.5°C at sensor |
| Temperature stability | +1.0°C at sensor |
| Injection needle wash | Integrated, active, programmable |
| Minimum sample required | 3µL residual, using Waters’ total recovery 2-mL vials |
| Carryover (UV) | <0.004% <0.001% typical |
| Advanced sample manager capabilities | Auto-dilution and auto-addition |
| Primary wetted materials | 316L stainless steel, polyimide, PEEK blend, DLC, PPS |
| Number of solvents | Up to four, in combination of two, A1 or A2 and B1 or B2 |
| Solvent conditioning | Integrated vacuum degassing, six lines with two allocated for the injector needle wash/purge solvents |
| Gradient formation | High pressure mixing, binary gradient |
| Gradient profiles | 11 gradient curve [ including linear, step (2), concave (4), and convex (4)] |
| Primary check valves | Intelligent Intake Valves |
| Flow accuracy | +1.0% of set flow rate at 0.500 mL/min, as per SystemsQT |
| Flow precision | 0.075% RSD or 0.01 min SD, (0.2 to 2.0 mL/min), whichever is greater using premixed solvent |
| Composition ripple (baseline noise) | <1.0 mAu |
| Pump compositional precision | <0.2% RSD, or 0.02 min SD, whichever is greater (from 0.2 to 2.0 mL/min) |
| Pump compositional accuracy | +0.5% absolute from 5% to 95%, 0.2 to 2.0 mL/min |
| Compressibility compensation | Automatic, no user intervention required |
| Priming | Wet priming runs at a flow rate of 4 mL/min |
| Pump seal wash | Equipped with a programmable active wash system to flush the rear of the high pressure seals and the plungers |
| Flow ramping | Automatic |
| Primary wetted materials |
316L stainless steel, UHMWPE blend, MP35N, titanium alloy, gold, sapphire, ruby, zirconia, Nitronic 60, DLC, fluoropolymer, PEEK and PEEK blend |
| Mixing options |
|
This Waters UPLC System includes:
- Waters 2996 PDA Detector
- Waters Sample Manager
- Waters Binary Solvent manager
This refurbished Waters UPLC System is in great condition. It has been tested at SpectraLab Scientific. A 90 day warranty is included.
People Also View
Related products
SpectraLab Scientific Inc
Established in 2003,
SpectraLab Scientific is a global leader of Refurbished analytical equipment. We specialize in reconditioning equipment, integrating the best available technologies from leading manufacturers across the industry. We are committed to quality and service, delivering strong customer satisfaction. We stock over 10,000 pre-owned lab equipment, components, and mix-and-match parts for your systems.
Our Services
Spectralab Scientific Inc. offers a variety of laboratory services to help you get started. Whether you’re setting up a new labs or developing your start up, we can help you overcome obstacles and provide turn-key solutions.
Repair Service
Parts and repairs for analytical equipment
Qualifications
IQ/OQ/PQ centered on compliance and data integrity
Service Contracts
Protect your lab and minimize downtime
Warranty
Up to 5 years warranty on most of the equipment
Installation & Training
Hassle-free setup & training from our professionals
Maintenance
Yearly PM to ensure peak performance