info@spectralabsci.com
+1 905-946-8066 | N/A Toll Free: +1 886-777-3688

Agilent 1200 Series HPLC system with G1310A Isocratic Pump and G1314B VWD

Item ID:

HP-PU-1014

Manufacturer

Condition

Refurbished

How do we Refurbish Lab Equipment?
Looking for further assistance? Contact Us

Price:

Request Quote/ Offer

Estimate Shipping Time

Canada & U.S.: 3-5 business days
International: 5-10 business days

Tariff-Free Shipping to the U.S.!

This HP / Agilent 1200 Series HPLC system comes with the followings:

This Agilent 1200 Series HPLC system is in a great shape. It has been tested at SpectraLab Scientific.

A 90 day warranty is included.

Agilent 1200 Manual PDFs


Performance Specifications

 

G1310A Iso Pump

Hydraulic system

Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve

Settable flow range

0.001 – 10 ml/min, in 0.001 ml/min increments

Flow range

0.2 – 10.0 ml/min

Recommended pH range

1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel.

Operating voltage

230V

Hydraulic system

Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve

Settable flow range

0.001 – 10 ml/min, in 0.001 ml/min increments

G1329A Autosampler
Type Specification
GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
Communications Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
Safety features Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
Injection range 0.1 – 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification required)
Replicate injections 1 – 99 from one vial
Precision Typically < 0.5 % RSD of peak areas from 5 – 100 µl, Typically < 1 % RSD of peak areas from 1 – 5 µl
Minimum sample volume 1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial
Carryover Typically < 0.1 %, < 0.05 % with external needle cleaning
Sample viscosity range 0.2 – 50 cp
Replicate injections per vial 1 – 99
Sample capacity 100 × 2-ml vials in 1 tray

40 × 2-ml vials in ½ tray

15 × 6-ml vials in ½ tray (Agilent vials only)

Injection cycle time Typically 50 s depending on draw speed and injection volume
G1316A TCC
Type Specification
Temperature range 10 degrees below ambient to 80 °C

up to 80 °C: flow rates up to 5 ml/min

Temperature stability ± 0.15 °C
Temperature accuracy ± 0.8 °C

± 0.5 °C (with calibration)

Column capacity Three 30 cm
Warm-up/cool-down time 5 minutes from ambient to 40 °C

10 minutes from 40 – 20 °C

Dead volume 3 µl left heat exchanger

6 µl right heat exchanger

Communications Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN via other 1200 series module
Safety and maintenance Extensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
GLP features Column-identification module for GLP

documentation of column type

Housing All materials recyclable
G1314B VWD

Type

Specification

Detection type

Double-beam photometer

Light source

Deuterium lamp

Noise

± 0.75 x 10 -5 AU, at 254 nm

Drift

3 x 10-4AU/hr, at 254 nm

Linearity

>2 AU upper limit

Wavelength range

190-600 nm

Wavelength accuracy

± 1 nm, self-calibration with deuterium lines, verification with holmium oxide filter

Wavelength bandwidth

6.5 nm typical over whole wavelength range

Maximum data rate

13 Hz

Flow cells

Standard: 14-µL volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum

High Pressure: 14-µL volume, 10-mm cell path length and 400 bar (5880 psi) Pressure maximum

Micro: 1-µL volume, 5-mm cell path length and 40 bar (588 psi) pressure maximum

Semimicro: 5-µL volume, 6-mm cell path length and 40 bar (588 psi) pressure maximum

Communications

Controller-area network (CAN), RS-232. APG Remote:ready, start, stop and shut-down signals, LAN optional

Safety and maintenance

Extensive diagnostics, error detection and display through control module and Agilent ChemStation, leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.

GLP

Electronic records of maintenance and errors. Early maintenance feedback (EMF) for continuous tracking of instrument usage, display of feedback messages if preset limits are exceeded. Verification of wavelength accuracy with built-in holmium oxide filter.

Housing

All materials recyclable

SpectraLab Scientific Inc
Established in 2003,

SpectraLab Scientific is a global leader of Refurbished analytical equipment. We specialize in reconditioning equipment, integrating the best available technologies from leading manufacturers across the industry. We are committed to quality and service, delivering strong customer satisfaction. We stock over 10,000 pre-owned lab equipment, components, and mix-and-match parts for your systems.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare